The other settings are not critical.Ĭonnect the Z80 family retro computer system to the appropriate serial port and reset it. Select “Terminal” from the Setup menu and ensure New-line is set to CR, and Local echo off. Systems using a 9600 baud bit-bang serial port, such as SC114’s built-in port, should be set to 9600baud, 8 data bits, 1 stop bit, no parity, hardware flow control enabled. Most systems require the terminal emulation software to be set to 115200 baud, 8 data bits, 1 stop bit, no parity, no hardware flow control. Select “Serial port” from the Setup menu. The following instructions assume the use of Tera Term v4.96 and is illustrated here running on Windows 10. PutSysPlus is a Small Computer Monitor App which installs CP/M to a Compact Flash card. Other documentation and methods can be found here: Below is one method of installing CP/M 2.2 on to a Compact Flash card using the PutSysPlus utility.
